Whirlpool DRYER 취업 지원 - 페이지 26

{카테고리_이름} Whirlpool DRYER에 대한 취업 지원을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool DRYER 36 페이지. Dryer whirlpool
Whirlpool DRYER에 대해서도 마찬가지입니다: 사용자 지침 (24 페이지), 설치 지침 매뉴얼 (20 페이지), 사용자 지침 (8 페이지)

페이지 인쇄

Removing the Rear Bulkhead Assembly

1. Remove the front panel.

2. Reach underneath drum to locate idler pulley. Push idler pulley to left to release drum belt

tension. Remove belt from motor pulley. Remove the drum from dryer.

3. Remove heat source assembly (burner assembly and funnel or heat element and duct).

4. Move dryer so you can easily remove back of dryer.

5. Starting with screw (A), remove in order screws

(A), (B), (C), (D), (E), (F), and (G) from back of dryer. (Fig. 45)

6. Slide rear bulkhead assembly up and out of dryer. (Fig. 46)

Reattaching the Rear Bulkhead

1. Slide the rear bulkhead assembly down into place at the rear of the cabinet.

2. Starting with screw (A) replace in order screws

(A), (B), (C), (D), (E), (F) and (G) to secure the

back panel of the dryer to the cabinet. (Fig. 47)

3. Move the dryer back into its installed location.

4. Replace the heat source assembly (burner assembly

and funnel or heat element and duct).

5. Replace the drum.

6. Reach underneath drum to locate idler pulley. Push idler pulley to left to wrap the belt around

motor pulley.

7. Replace the front panel.

Fig. 46

Fig. 45

Fig. 47