Whirlpool Duet sport 사용 및 관리 매뉴얼 - 페이지 11

{카테고리_이름} Whirlpool Duet sport에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool Duet sport 44 페이지. Electronic electric dryer
Whirlpool Duet sport에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (28 페이지), 사용 및 관리 매뉴얼 (48 페이지), 사용자 설명서 (48 페이지)

페이지 인쇄

3. Remove the 6 Phillips head screws to release the outer door

assembly from the inner door assembly, as indicated below.

See illustration. It is important that you remove only the

6 indicated screws.

4. Lift the inner door assembly off the outer door assembly.

5. Disengage locking tabs by rotating inner ring clockwise. See

illustration.

A. Inner ring

B. Outer ring

6. Turn inner ring 180° and lock tabs into place.

Reverse hinge

1. Use a small flat-blade screwdriver to remove 2 plug strips

from the inner door. Slide the head of the screwdriver under

the plugs, being certain not to scratch the inner door surface.

Lift up.

2. Remove hinge cover.

3. Remove the 4 screws that attach to the inner door hinge and

move the hinge to the other side. Reinstall the 4 screws.

4. Reinstall plug strips on opposite side of the inner door.

5. Check for fingerprints on the glass. Clean glass if necessary.

6. Place the inner door assembly inside the outer door

assembly. To fit correctly, the inner door assembly edge fits

completely inside the outer door assembly edge.

7. Reassemble the inner and outer door assemblies with the

6 screws.

A. Door hinge

B. Plug strips

C. Hinge cover

A. Door hinge