Whirlpool WGD7300DW 설치 지침 매뉴얼 - 페이지 11

{카테고리_이름} Whirlpool WGD7300DW에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool WGD7300DW 44 페이지. Gas and electric dryer 29" wide models
Whirlpool WGD7300DW에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (40 페이지)

페이지 인쇄

MAKE ELECTRICAL CONNECTION - U.S.A. ONLY (EFFECTUER LE

RACCORDEMENT ÉLECTRIQUE – ÉTATS-UNIS SEULEMENT)

Power Supply Cord

ELECTRICAL CONNECTION OPTIONS

Choose electrical connection type

Power supply cord 4-wire receptacle

(NEMA Type 14-30R): Go to steps 1-2

on page 12 for power supply cord strain

relief: then steps 3-6 for 4-wire Power

Supply Cord Connection section. Then,

go to Venting Requirements.

Power supply cord 3-wire receptacle

(NEMA Type 10-30R): Go to steps 1-2

on page 13 for power supply cord strain

relief: then steps 3-5 for 3-wire Power

Supply Cord Connection section. Then

go to Venting Requirements.

4-wire direct connection: Go to steps

1-2 on page 14 for direct wire strain relief:

then steps 3-8 for 4-wire Direct Wire

Connection section. Then go to Venting

Requirements.

3-wire direct connection: Go to steps

1-2 on page 15 for direct wire strain relief:

then steps 3-7 for 3-wire Direct Wire

Connection section. Then go to Venting

Requirements.

NOTE:

If local codes do not permit connection of a

cabinet-ground conductor to neutral wire, go to "Optional

3-wire Connection" section. This connection may be

used with either a power supply cord or a direct wire

connection.

Direct Wire

Remove terminal block cover

Before you start, disconnect power. Remove hold-down

screw (D) and terminal block cover (A).

A. Terminal block cover

B. External ground conductor screw

C. Center terminal block screw

D. Hold-down screw

E. Neutral ground wire

F. Hole below terminal block cover

C C