Whirlpool WGD7500GC 설치 지침 매뉴얼 - 페이지 15
{카테고리_이름} Whirlpool WGD7500GC에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool WGD7500GC 40 페이지. Electronic dryer
Whirlpool WGD7500GC에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (48 페이지), 사용 및 관리 매뉴얼 (32 페이지)
페이지 인쇄
Optional 3-wire Connection
You must verify with a qualified electrician that this grounding
method is acceptable before connecting.
1.
Prepare to connect neutral
ground wire and neutral wire
E
Remove center terminal block screw (B). Remove neutral
ground wire (E) from external ground conductor screw (A).
2.
Connect neutral ground wire
and neutral wire
C
Connect neutral ground wire (E) and neutral wire (white or
center wire) (C) of power supply cord or cable under center
terminal block screw (B). Tighten screw.
3.
Connect remaining wires
B
Connect remaining wires to outer terminal block screws
Tighten screws.
A
4.
Connect external ground wire
G
E
B
Connect a separate copper ground wire (G) from the external
ground conductor screw (A) to an adequate ground. Finally,
reinsert tab of terminal block cover into slot of dryer rear
panel. Secure cover with hold-down screw. Now, go to
"Venting Requirements."
A
15