Whirlpool WGD7990XG0 설치 지침 매뉴얼 - 페이지 15

{카테고리_이름} Whirlpool WGD7990XG0에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool WGD7990XG0 32 페이지. Gas dryer
Whirlpool WGD7990XG0에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (32 페이지)

페이지 인쇄

Adjust leveling legs

If dryer is not level, prop up using a wood block, use wrench

to adjust legs up or down, and check again for levelness.

Once the dryer is level, make sure all four legs are snug

against the floor.

COMPLETE INSTALLATION

CHECKLIST

Check that all parts are now installed. If there is an extra

part, go back through steps to see what was skipped.

Check that you have all of your tools.

Dispose of/recycle all packaging materials.

Be sure the water faucets are on.

Check for leaks around "Y" connector, faucet, and hoses.

Check dryer's final location. Be sure vent is not crushed

or kinked.

Check that dryer is level. See "Level Dryer".

Remove film on console and any tape remaining on dryer.

Wipe dryer drum interior thoroughly with a damp cloth

to remove any dust.

Read "Dryer Use" in your "Use and Care Guide".

If you live in a hard water area, use of a water softener

is recommended to control the buildup of scale through

the water system in the dryer. Over time, the buildup of lime

scale may clog different parts of the water system, which will

reduce product performance. Excessive scale buildup may

lead to the need for certain part replacement or repair.

Electric Models:

Plug into a grounded outlet.

Gas Models:

Check that gas supply is on.

Check for leaks.

All Models:

Select a Timed Dry heated cycle, and start dryer. Do not

select Air Only Temperature setting.

If dryer will not start, check the following:

• Start button has been pushed firmly.

• D ryer is plugged into an outlet and/or electrical supply

is connected.

• H ousehold fuse is intact and tight, or circuit breaker

has not tripped.

• Dryer door is closed.

This dryer automatically runs an installation diagnostic routine

at the start of its first cycle.

NOTE:

You may notice an odor when dryer is first heated. This

odor is common when heating element is first used. The odor will

go away.

TROUbLESHOOTINg

See the "Use and Care Guide" or visit our website and reference

Frequently Asked Questions to possibly avoid the cost of a

service call.