Whirlpool WGD8200Y 치수 및 설치

{카테고리_이름} Whirlpool WGD8200Y에 대한 치수 및 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool WGD8200Y 2 페이지. Whirlpool gas dryer dimensions and installation
Whirlpool WGD8200Y에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (36 페이지)

Whirlpool WGD8200Y 치수 및 설치
PRODUCT MODEL NUMBERS
WGD8200Y, WGD8400Y,
WGD8600Y, WGD8800Y
Side view with open door dimensions:
NOTE:
Most installations require a minimum 5" (102 mm)
clearance behind the dryer for the exhaust vent with elbow.
See "Venting Requirements".
Recommended Installation Spacing:

Gas Dryer

Back view:
Spacing for recessed area or closet installation
All dimensions show recommended spacing allowed, with
tested spacing of 0" (0 mm) clearance on sides and rear.
Additional spacing should be considered for ease of
installation and servicing.
Additional clearances might be required for wall, door, and
floor moldings.
Additional spacing should be considered on all sides of the
dryer to reduce noise transfer.
For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilitation openings are
acceptable.
Companion appliance spacing should also be considered.
Bottom view: