Whirlpool WGD86HEBC 설치 매뉴얼 - 페이지 20

{카테고리_이름} Whirlpool WGD86HEBC에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool WGD86HEBC 44 페이지. Whirlpool duet 7.4 cu. ft. front load electric dryer with eco monitor
Whirlpool WGD86HEBC에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 사용 및 관리 매뉴얼 (40 페이지)

페이지 인쇄

Reinstall hinge and latch on

opposite sides

Using a TORX

T25 screwdriver, reinstall the latch plate and

latch backing plate with the 3 TORX screws removed earlier

and the hinge assembly with the 5 screws on the opposite

sides from which they were removed.

Reinstall inner door assembly

Position the door with the inside of the door facing up.

Reinstall the 10 screws securing the inner door to the

outer door.

Reinstall door on dryer

Using a TORX T25 screwdriver, remove the 4 screws on the

dryer. Insert the tabs on the hinge into the mounting slot and

slide down to engage the top tab. Secure in place with

the 4 TORX T25 screws removed earlier.

Reverse door swing square-shaped door

Remove door from dryer

Bottom

of door

Using a TORX T25 screwdriver, remove the 4 screws securing

the door hinge to the dryer and lift up and out to remove the

door. Place the door on a soft towel or other non-scratch

surface. Retain or set aside the 4 screws.