FireplaceXtrordinair 36E - ZC 빌더 책자
{카테고리_이름} FireplaceXtrordinair 36E - ZC에 대한 빌더 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. FireplaceXtrordinair 36E - ZC 11 페이지.
FireplaceXtrordinair 36E - ZC에 대해서도 마찬가지입니다: 빌더 책자 (11 페이지)
페이지 인쇄
Disclaimer
This booklet partially details the installation requirements for the 44E-ZC fireplace. It is intended to give general
information prior to delivery of the fireplace. For full installation requirements, refer to the installation manual (part
# 93508093).
Listing Information
The 44E-ZC fireplace has been tested to U.L. 127 and portions of U.L. 1482 and 907 by
Warnock Hersey, Ltd. (Intertek Testing Services).
Installation Options
•
Straight or Corner Placement
•
Flush or Recessed Face
•
Raised or Flush Floor Hearth
•
Internal or External Chase
•
8' leads for the power source and the blower (120 Volts A.C.)
•
Set-up face is included to ease facing installation
•
3 blower duct locations for a wide selection of interior or exterior blower installation options
Installation Overview
See the section
"Minimum
Clearances"
18" Min.
See the section
"Mantel Requirements"
See the section
"Facing Requirements"
See the section
"Hearth Requirements"
Part # 17601185
44E - ZC Builder Booklet
TM
See the section
"Minimum Framing
Dimensions"
© 2002, Travis Industries, Inc.
See the section
"Chimney Requirements"
See the section
"Cooling Vents"
Insulation must not fill the
spaces between the stand-offs
See the section
"Blower"
Page 1
Printed 3/8/02