Clam Corp 8200 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Clam Corp 8200에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clam Corp 8200 4 페이지. Portable ice shelter

• Locate the Flexible Rods and unfold them into the straightened position.

• Go into the unit and slide one end of a Flexible Rod into one of the corner pockets located on the corners of

the Hoop Tubes.

• Slide the other end of the Flexible Rod into a pocket located on the opposite Hoop Tube, diagonally across

the shelter. (The Rods will form an "X" when assembled).

• Do the same with the other Flexible Rod and then Velcro the two Flexible Rods together where they cross

with the Velcro attached to the center of the tent roof. You are now ready to fish!!

Rod Pocket

SAFETY INSTRUCTIONS

• Remove the Flexible Rods and fold them up. Place them on the side of the Floor Half without the bucket

impressions. (When used, the bucket impressions help steady a bucket while towing in the collapsed

position).

• Collapse both Hoop Tube assemblies and rotate them down onto their respective floors.

• Now fold the Floor Half with the bucket impressions onto the other. Tuck the tent material between the Floor

Halves so that the material is protected.

• Attach the provided Latch Clips to hold the shelter in the closed portable position. (The Eyelets of the Latch

Clips may be used for roping down gear on top of the unit while on the go.)

- SET UP INSTRUCTIONS -

- TAKE DOWN INSTRUCTIONS -

Flexible Rod

Latch Clip Eyelet