Whirlpool WPWADRGC17500 사용 및 관리 매뉴얼 - 페이지 9

{카테고리_이름} Whirlpool WPWADRGC17500에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool WPWADRGC17500 32 페이지. Electronic dryer
Whirlpool WPWADRGC17500에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (40 페이지)

페이지 인쇄

TIMED DRY Cycle:

When you select Timed Dry, the default time appears in the

display. Touch "+" and "–" to increase or decrease the time

in 1 minute increments. Touch and hold to change the time

in 5 minute increments.

The default temperature may be changed by touching

Temperature until the desired dry temperature is lit.

Adjust cycle modifiers, if desired

You may adjust different settings,

depending on what you are drying and how

you are going to dry the items. Selecting

Sanitize will override all other modifiers.

See the "Cycle Guide" for detailed

information.

NOTE: Not all options and modifiers are

available with all cycles.

Select any additional options

Add additional options such as Drum Light, Wrinkle Shield

Signal, and/or Damp Dry Signal by touching that option. If

you will be unable to remove the load promptly, select Wrinkle

Shield

before touching START/PAUSE.

™

NOTE: Not all options and settings are available with

all cycles.

Touch and hold START/PAUSE

to begin cycle

Touch and hold START/PAUSE to begin the cycle.

Remove garments promptly

after cycle is finished

Promptly remove garments after cycle has completed

to reduce wrinkling.

Changing the Automatic Cycle settings

to increase or decrease drying time

If all your loads on all Automatic cycles are consistently

less dry or more dry than you would like, you may change

the default settings to increase or decrease the default

dryness level.

Your automatic drying settings can be adjusted to adapt to

different installations, environmental conditions, or personal

preference. This change is retained and will affect all of your

Automatic cycles, not just the current cycle/load. There are

five drying settings, which are displayed using the

LED display:

™

0 Much wetter clothes, 30% less drying time.

1 Slightly wetter clothes, 15% less drying time.

2 Factory preset dryness level.

3 Slightly drier clothes, 15% more drying time.

4 Much drier clothes, 30% more drying time.

To change the drying settings:

1. Before starting a cycle, touch and hold DRYNESS

for 6 seconds.

2. Touch DRYNESS to select the dryness level shown

in the time display: 0, 1, 2, 3, or 4.

3. Touch START/PAUSE to save the new dryness

level setting.

NOTE: The settings cannot be changed while the dryer

is running or paused. The dryer must be in standby

mode (power is off) to adjust the default settings.