Whirlpool WTW5000DW 사용 및 관리 매뉴얼 - 페이지 13

{카테고리_이름} Whirlpool WTW5000DW에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool WTW5000DW 36 페이지. Top-loading high efficiency
Whirlpool WTW5000DW에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (36 페이지), 설치 지침 매뉴얼 (20 페이지)

페이지 인쇄

Troubleshooting

First try the solutions suggested here or visit our website at www.whirlpool.com/product_help -

If you experience

Washer not performing as expected (cont.)

Washer won't run or fill,

washer stops working

or wash light remains

on (indicating that the

washer was unable to fill

appropriately)

In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.

Possible Causes

Check for proper water supply.

Check proper electrical supply.

Normal washer operation.

Washer may be tightly packed.

Not using HE detergent or using too

much HE detergent.

Both hoses must be attached and have water flowing to inlet

valve.

Both hot and cold water faucets must be turned on.

Check that inlet valve screens have not become clogged.

Check for any kinks in inlet hoses, which can restrict water flow.

Plug power cord into a grounded 3 prong outlet.

Do not use an extension cord.

Ensure there is power to outlet.

Reset a tripped circuit breaker. Replace any blown fuses.

NOTE: If problems continue, contact an electrician.

Lid must be closed for washer to run.

Washer will pause during certain phases of cycle. Do not

interrupt cycle.

Washer may be stopped to reduce suds.

Remove several items, rearrange load evenly around the

washplate. Close lid and press START/Pause.

Add only 1 or 2 additional items after washer has started.

Do not add more water to the washer.

Only use HE detergent. Suds from regular detergents can slow or

stop the washer. Always measure detergent and follow

detergent directions based on your load requirements.

To remove suds, cancel cycle. Select RINSE & SPIN. Press

START/Pause. Do not add more detergent.

Solution