Whirlpool XCEM2765 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Whirlpool XCEM2765에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool XCEM2765 23 페이지. Commercial gas or electric dryer

페이지 인쇄

MAINTENANCE INSTRUCTIONS

Clean lint screen before and after each cycle.

■

Removing accumulated lint:

■

From inside the dryer cabinet:

Lint should be removed every 2 years or more often,

depending on dryer usage. Cleaning should be done by

a Whirlpool authorized person.

From the exhaust vent:

Lint should be removed every 2 years, or more often,

depending on dryer usage.

Keep area around dryer clear and free from combustible

■

materials, gas, and other flammable vapors and liquids.

Keep dryer area clear and free from items that would

■

obstruct the flow of combustion and ventilation air.

WARNING:

Improper connection of the equipment-earthing conductor can result in a risk of electric

shock. It is your responsibility to check with a qualified electrician or service representative if you are in doubt

as to whether the dryer is properly grounded and meets all local codes and ordinances. Do not modify the

plug provided with the dryer: If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

IF YOU NEED ASSISTANCE

If you need help, contact the dealer from whom you purchased the appliance, or a Whirlpool designated service company. When

calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to

better respond to your request.

IF YOU NEED SERVICE:

Contact your authorized Whirlpool Commercial Laundry distributor. To locate your authorized Whirlpool Commercial Laundry

distributor, visit www.WhirlpoolCommercialLaundry.com.

For written correspondence:

Whirlpool Commercial Laundry Service Department

2000 N M 63

Benton Harbor, Michigan 49022-2632 USA

If dryer does not operate, check the following:

Electrical supply is connected.

■

Circuit breaker is not tripped or house fuse is not blown.

■

Door is closed. Listen closely to hear the door switch

■

activate.

Controls are set in a running or "on" position.

■

START button has been pushed firmly.

■

For gas dryers, check that gas supply shut-off valves are

■

set in open position.