Whirlpool YGEW9250PW 사용 및 관리 매뉴얼 - 페이지 18
{카테고리_이름} Whirlpool YGEW9250PW에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool YGEW9250PW 40 페이지. Electronic electric dryer
페이지 인쇄Unusual sounds
•
Has the dryer had a period of non-use?
If the dryer hasn't been used for a while, there may be a
thumping sound during the first few minutes of operation.
Lint on load
•
Is the lint screen clogged?
Clean lint screen. Check for air movement.
•
Is load properly sorted?
Sort lint givers (towels, chenille) from lint takers (corduroy,
synthetics). Also sort by color.
•
Is the load too big or too heavy?
Dry smaller loads so lint can be carried to the lint screen.
•
Was the load overdried?
Use correct dryer settings for load type. See "Cycles."
Overdrying can cause lint-attracting
static electricity.
•
Was paper or tissue left in pockets?
•
Is pilling being mistaken for lint?
Pilling (surface fuzz) is caused by normal wear and
laundering.
Stains on load or color change
Was dryer fabric softener properly used?
Add dryer fabric softener sheets at the beginning of the cycle
when the load is cold. Do not add fabric softener sheets to a
warm load.
•
Were items soiled when placed in the dryer?
Items should be clean before being dried.
•
Were items properly sorted?
Sort light colors from dark colors. Sort colorfast items from
noncolorfast
items.
Items shrinking
•
Was the dryer overloaded?
Dry smaller loads that can tumble freely.
•
Did the load overdry?
Check the manufacturer's
care label. Match dryer setting to
load type. See "Cycles."
Loads are wrinkled
•
Was load removed from dryer at the end of the cycle?
•
Was dryer overloaded?
Dry smaller loads that can tumble freely.
•
Did load overdry?
Check the manufacturer's
care label. Match dryer setting to
load type. See "Cycles."
Odors
•
Have you recently been painting, staining or varnishing in
the area where your dryer is located?
If so, ventilate the area. When the odors or fumes are gone
from the area, rewash and dry the clothing.
•
Is the dryer being used for the first time?
The new electric heating element may have an odor. The odor
will be gone after the first cycle.
Garment
damage
•
Check the following:
Were zippers, snaps, and hooks left open?
Were strings and sashes tied to prevent tangling?
Were care label instructions
followed?
Were items damaged before drying?
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
"Troubleshooting."
It may save you the cost of a service call. If
you still need help, follow the instructions
below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement
parts
If you need to order replacement parts, we recommend that you
use only FSP_ factory specified parts. These parts will fit right
and work right because they are made with the same precision
used to build every new WHIRLPOOL ® appliance.
To locate
FSP replacement
parts in your area:
Call 1-800-807-6777,
or your nearest designated service center.
For assistance
Call the Whirlpool Canada Inc. Customer Interaction Center toll
free: 1-800-461-5681
Monday to Friday 8:00 a.m. - 6:00 p.m.
(EST). Saturday 8:30 a.m. - 4:30 p.m. (EST).
Our consultants
provide assistance with:
•
Features and specifications
on our full line of appliances.
•
Referrals to local dealers.
For service
Call 1-800-807-6777.
Whirlpool Canada Inc. designated service
technicians are trained to fulfill the product warranty and provide
after-warranty
service, anywhere in Canada.
For further
assistance
If you need further assistance, you can write to Whirlpool Canada
Inc. with any questions or concerns at:
Customer Interaction Center
Whirlpool Canada Inc.
1901 Minnesota Court
Mississauga,
Ontario L5N 3A7
Please include a daytime phone number in your correspondence.
18