Whirlpool YMEDB765FW0 설치 지침 매뉴얼 - 페이지 12
{카테고리_이름} Whirlpool YMEDB765FW0에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool YMEDB765FW0 24 페이지. Gas and electric dryer
페이지 인쇄
3-wire Power Supply Cord Connection
Use where local codes permit connecting cabinet-ground
conductor to neutral wire.
3-wire receptacle (NEMA
type 10-30R)
Spade terminals with
upturned ends
1.
Remove center screw
Remove center terminal block screw (B).
2.
Connect neutral wire
Connect neutral wire (white or center) (C) of power supply cord
to center terminal block screw (B). Tighten screw.
12
3-prong plug
Ring terminals
B
C
B
3.
Connect remaining wires
Connect remaining wires to outer terminal block screws.
Tighten screws. Finally, reinsert tab of terminal block cover
into slot of dryer rear panel. Secure cover with hold-down
screws. Now, go to "Venting Requirements."
DIRECT WIRE CONNECTION
Direct Wire Strain Relief
1.
Attach direct wire strain relief
A
B
C
Unscrew the removable conduit connector (A) and any
screws from a 3/4" (19 mm) UL listed strain relief (UL marking