Whirlpool YWED85HEFW2 설치 지침 매뉴얼 - 페이지 16

{카테고리_이름} Whirlpool YWED85HEFW2에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool YWED85HEFW2 48 페이지.

DOOR REVERSAL (OPTIONAL)

The following instructions are for models with round and

square-shaped doors.

Tools needed:

Min. 8" (203 mm) long

TORX

T25

screwdriver

†

Reverse door swing: round-shaped door, fl at glass –

single handle

Remove door from dryer

IMPORTANT: If the protective fi lm has not yet been

removed from the dryer, peel the fi lm from the dryer

door before proceeding.

Using a T25

screwdriver, remove the four screws securing

the door hinge to the dryer and lift up and out to remove

the door. Place the door on a soft towel or other non-scratch

surface. Reinstall the four screws in the holes.

#2 Phillips screwdriver

Move the door strike

Using a T25

screwdriver, remove the two screws securing

the door strike to the door frame of the dryer. Rotate the strike

180° and attach to the opposite side of dryer door frame

as shown.

Remove inner door from outer door

Position the door with the inside of the door facing up.

Using a Phillips screwdriver, remove the 10 screws securing

the inner door to the outer door. Lift off the inner door and

set aside.

†

TORX and T25 are registered trademarks of Acument Intellectual Properties, LLC.