Calandra Racing Concepts Gen-X 10 조립 설명서 - 페이지 6

{카테고리_이름} Calandra Racing Concepts Gen-X 10에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Calandra Racing Concepts Gen-X 10 19 페이지.

Tweak Plates

Side Spring

Bag 4

TTACH

PRING TO

ETAL

Use a small screwdriver or your fingernail to start the

spring [27] into the groove on the metal retainer [26].

Pull the leading coil over the retainer and place the top

coil into the groove. Then, holding the retainer

securely, turn the spring clockwise to "open" the coil

and snap the remaining portion over the groove.

1 - Mount the completed tweak brace assembly to the chassis

as shown using the 4-40 x 1/4" red flat head screws [23]. Do

this for both left and right side tweak plates.

4-40 x ½"

White

Red Standoff

ETAINER

Red Alum

Red Locknut

4-40 Ballstud

Assemble the Tweak Plates

1 - Use the red button head screws [22] to fasten the red

standoffs [28] to the graphite tweak plate [24].

2 - Put the red ball stud [29] through the tweak plate and

secure with a red locknut [9] as shown in the illustration.

4-40 x 1/4"

Red Button Head

Red Alum FH