Clank Chaos 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Clank Chaos에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clank Chaos 2 페이지.
Clank Chaos에 대해서도 마찬가지입니다: 매뉴얼 (10 페이지), 매뉴얼 (12 페이지)
페이지 인쇄*Modifiers
Probability. It's a coin loss to decretate if the
channel gate will fire or not. Changing the
probability value will reduce its possibility to
happen. If you're using channel 1 as master
clock, changing its probability will affect its
gate output but not the master clock. Turn it
to zero to mute a channel.
Width. It's the length of the gate in
percentage of the duty cycle. Range goes
from 0% (channel muted) to 100% (fully
open).
2nd function: Racheting. Tap and hold to
access Width second function.
Time. Pressing time and turning the
encoder CCW will result in a faster clock.
Rotate CW to make it slower. The value
reflects
the
distance
consecutive gates in ms. When unsynced,
tap on the button to set its bpm on the fly.
If the selected channel is synced to the
master clock the Time button will let you set
a multiplication or a division of the master
itself. Rotating the encoder CW multiplies it
(leds in white), CCW divides it (leds inorange).
The available multiplication and division are
from 1 to 8, then from 16 to 32.
2nd function: Time Swing. Tap and hold to
shift a channel by a fraction of the master
clock.
Voltage window. With this modificator you
can limit the number of values that the
generator can pick by reducing its maximum.
Ground transpose. Use this modificator
to shift the window of values that the
genetator can pick. Every encoder dent will
increase the ground by a semitone. When
quantized, turn until reaches the next note
of the selected scale.
2nd function: Root note. Tap and hold
ground transpose to access its second
function. Now the root note of the scale
can be changed. White dots indicate natural
notes, red dots represent the sharp ones.
***Quantizer scales
First set:
•
Unquantized (Default)
•
Chromatic
•
Octave
•
Major pentatonic
•
Minor pentatonic
•
Blues
•
Arabic
•
Pelog
•
Hirajōshi
•
Chinese
Second set:
•
Ionian
•
Dorian
•
Phrygian
•
Lydian
•
Mixolydian
•
Aeolian
•
Locrian
Third set:
•
Ascending melodic minor
•
Dorian b2
•
Lydian augmented
•
Lydian dominant
•
Mixolydian b6
•
Locrian #2
•
Super Locrian
beetween
two
**Input assign
•
LED 1 ON (default): the channel is
synced to the master clock
•
LED 1 OFF: the channel is unsynced
and has its own timing expressed in
millisecond between beats
•
LED 2 ON (default): a gate sent in the
loop in will activate the loop in this
channel
•
LED 2 OFF: sending a gate to loop in
will not effect the selected channel
•
LED 3 OFF (default): the internal
random voltage generator will be
used to generate the new values
•
LED 3 GREEN: All the new channel's
cv values will be sampled from the
CV IN excluding the internal random
generator .
•
LED 3 RED: Cv transpose is activated.
Internal random sequences will be
transposed by the incoming CV
signal.
•
LED 3 ORANGE: Hold the encoder
untill the led turns to orange to
use a voltage into the CV IN to
move between the saved slots.
(0-8V). Hold again to go back.
VERY IMPORTANT: this last function
is global and not channel specific.
•
Led 4 ON (default): chaos mode
can be activated by a gate on the
chaos input. The input assing led will
quickly blink in violet
•
Led 4 OFF led: gate signals on chaos
input won't have any effects on the
selected channel