FireplaceXtrordinair 4237 매뉴얼

{카테고리_이름} FireplaceXtrordinair 4237에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FireplaceXtrordinair 4237 3 페이지. Fireback
FireplaceXtrordinair 4237에 대해서도 마찬가지입니다: 설치 (3 페이지), 설치 (4 페이지)

페이지 인쇄
FireplaceXtrordinair 4237 매뉴얼
This fireplace is larger than most fireplaces and requires special attention when moving into position. The directions
below are intended as a guideline for this process.
Do not lift the fireplace from below with lifting forks. This may cause the base to bend and warp.
Always use proper lifting techniques when moving heavy objects (bend your knees, not your back).
We recommend using the Travis Industries lifting handles (sku# 98500711) for moving the fireplace.
See the instructions included with the brackets for installation instructions.
1. Remove the screen box in front of the firebox opening and place it aside.
2. Locate and remove the glass frame tool from the fireplace.
GLASS FRAME TOOL
The glass frame tool is shipped inside the fireplace, on the right side of the fireplace opening. The first time it is used you
may need to loosen the screw (1/4" nut driver). The tool is accessed after removing the screen.
NOTE: Replace the tool in this location after use.
Page 1 of 3
4237 EG Fireplace
17602223 - 10/6/2021
Travis Industries, Inc.