Acomdata 550 빠른 시작 매뉴얼 - 페이지 7
{카테고리_이름} Acomdata 550에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acomdata 550 13 페이지. External hard drives with raid 0
페이지 인쇄
Connecting the Drive to your computer
Before you connect the Drive, please carefully read the notes and
restrictions below. Failure to adhere to any of them can damage
the Drive and void the warranty:
•
If your 550 Drive came with two power cords, be sure to use the
correct cord for your region.
•
Do not use more than one interface cable to connect the Drive to
your computer.
•
Do not connect the Drive to more than one computer at a time.
•
If your Drive is equipped with FireWire, you can daisy-chain
another FireWire device to the Drive. See "Daisy-Chaining the
Drive".
•
Do not connect a USB device to the Drive. USB devices must be
connected to the computer, either directly or via a USB hub.
•
Interface cable connectors can only be plugged
in one way. Be sure to orient them correctly when
you insert them.
•
The USB cable has a type A connector and a type
B connector. The type A connector plugs into a
USB port on your computer or hub; the type B
connector plugs into the Drive.
6
"A"
"B"
usb
cable