ABB FENA-11 빠른 설치 및 시작 매뉴얼

{카테고리_이름} ABB FENA-11에 대한 빠른 설치 및 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB FENA-11 2 페이지. Ethernet adapter module, options for drives

—

OPTIONS FOR ABB DRIVES

FENA-01/-11 Ethernet adapter module

Quick installation and start-up guide

Safety instructions

WARNING! Obey the safety instructions. If you ignore them, injury or death, or damage to the

equipment can occur. See the user's manual.

Mechanical installation

1. Pull out the lock.

2. Install the module carefully to an option module slot of

the drive. See the drive hardware manual.

3. Push in the lock.

4. Tighten the screw to torque 0.8 N·m using a Torx

TX10 screwdriver.

WARNING! Do not use excessive force, or leave the screw too loose. Over-tightening can damage

the screw or module. A loose screw decreases the EMC performance, and can even cause an

operation failure.

Layout of the module



No.

Description

Lock

Mounting and grounding screw

RJ-45 connector [X1] to Ethernet

Diagnostic LEDs

MAC ID