FirePro FPC-2 빠른 시작 매뉴얼
{카테고리_이름} FirePro FPC-2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FirePro FPC-2 2 페이지. Fire control panel system isolation
FirePro FPC-2에 대해서도 마찬가지입니다: 운영 및 유지보수 매뉴얼 (7 페이지), 작동 및 설치 매뉴얼 (14 페이지), 운영 및 유지보수 매뉴얼 (8 페이지)
페이지 인쇄
Fire Control Panel for FirePro Aerosol Systems
1. Introduction
All FirePro Fire Extinguishing Aerosol Generators use the latest generation FPC solid compound. Upon activation,
the solid compound is transformed into a rapidly expanding, highly efficient gas, based on Potassium salts. It does
not deplete oxygen levels.
maintenance required.
Ozone Depletion Potential (O.D.P.) = 0
Global Warming Potential (G.W.P.) = 0
Self Activation Temperature
FirePro Condensed Aerosols have a built-in fail-safe activation system ensures operation of the generators when
required, even if everything else fails.
When the temperature of the Aerosol units reaches 300°C the unit will activate
DO NOT Carry out any welding or grinding work in the vicinity of the aerosol units.
Handling and Storage - Condensed Aerosol Generators do not:
•
Disassemble the unit
•
Carry out any welding or grinding work in
the vicinity of the fire extinguishing
system components.
STORAGE and OPERATIONAL CONDITIONS
•
Temperature: –54 and +54°C
•
Service life: 15 years (date of manufacture appears on each generator)
fp_c2_isol_1.0.docx
Isolation Procedure
The FirePro Aerosol Generators have a certified life of 15 years, with minimal
Fire Control Panel – FP-C2
SYSTEM ISOLATION
Atmospheric Life Time (A.L.T.) = 0
Non-corrosive & Non-toxic
•
Exert force or impact which creates
physical or mechanical damage to the
casing.
•
Humidity: maximum 98% RH
Rev 1.0
Page 1 of 2