Whirlpool AKR 468 IX 설치 - 페이지 3

{카테고리_이름} Whirlpool AKR 468 IX에 대한 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AKR 468 IX 4 페이지. Extractor or filtering hood

1. Control panel.

a. Light switch.

b. Extraction and minimum extraction speed ON/OFF

switch.

Medium extraction speed switch.

d. Maximum extraction speed switch.

2. Grease filters.

3. Halogen lamps.

4. Telescopic flue.

Grease filters:

Metal grease filters have an unlimited life

and should be washed once a month

either by hand or in a dishwasher at a

low temperature and with a short cycle.

Washing in a dishwasher can cause

grease filters to turn white, but this in no

way affects efficiency.

a. press the handle to remove the filter

b. remove it.

Wash the filter and leave it to dry, proceeding in reverse

order to refit it.

Halogen lamps:

Use a small screwdriver or other

suitable tool to prise off the cover.

Refit (snap on).

Only use 20 W max. (12V-G4)

halogen lamps, taking care not to

touch them with hands.

5019 318 33246

Active carbon filter

(filter hoods only):

The carbon filter must be cleaned once a month in a

dishwasher at the highest temperature, using a normal

dishwasher detergent. Wash the filters on their own.

After washing, reactivate the carbon filter by drying it in the

oven at 100°C for 10 minutes.

Change the carbon filter every 3 years.

Fitting the carbon filter:

1. Remove the grease filter.

2. Remove the filter holder by turning the knobs 90°.

3. Fit the carbon filter "i" in the filter holder "h".

Reverse the above procedure to re-fit the filter holder and

grease filter.