Whirlpool AKR 938 설치 시트 - 페이지 7
{카테고리_이름} Whirlpool AKR 938에 대한 설치 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AKR 938 7 페이지.
![Whirlpool AKR 938 설치 시트](/uploads/products/server2/6872065/6872065.png)
31833001.fm5 Page 9 Wednesday, March 28, 2001 4:28 PM
AKR 938
1. Control panel
a.
Light ON/OFF switch.
b.
Extraction and minimum extraction speed
ON/OFF switch.
c.
Medium extraction speed switch.
d.
Maximum extraction speed switch.
2. Grease filter.
3. Grease filter handle.
4. Halogen bulbs.
5. Telescopic flue.
6. Steam deflector screen.
To clean the grease filter
Wash the grease filter at least once a month.
1. Disconnect the electrical power supply.
2. Remove the grease filters - Fig. 1: pull the spring
release handle (f) downwards, then remove the
filter.
3. After cleaning the grease filter refit in reverse
order, making sure the entire extraction surface is
covered.
Replacing bulbs
1. Disconnect the electrical power supply.
2. Use a small screwdriver or any other suitable tool
to prise off (m - Fig. 2) the lamp cover (p - Fig. 2).
3. Replace the burnt-out bulb.
Use 20 W max halogen bulbs only, taking care not
to touch them with hands.
4. Close the lighting unit (snap-close).
Carbon filter Fitting and Maintenance
Fitting the carbon filter:
1. Disconnect the electrical power supply.
2. Remove the grease filter (f - Fig. 1).
3. Remove the screw and then the filter holder
(g - Fig. 3).
4. Fit the carbon filter (h - Fig. 3) in the filter holder
(i - Fig. 3).
5. Refit the filter holder and secure it to the hood
with the screw (g - Fig. 3).
6. Refit the grease filter.
Carbon filter maintenance:
Unlike traditional carbon filters, this carbon filter can
be washed and reactivated.
With normal hood use, the filter should be cleaned
once a month. The best way to clean the filter is in a
dishwasher at the highest temperature possible, using
a normal dishwasher detergent. To avoid particles of
food or dirt settling on the filter during washing and
giving rise to unpleasant smells, it is advisable to wash
the filter on its own. After washing, dry the filter in the
oven at 100° C for 10 minutes to reactivate it.
The filter will retain its odour-absorbing capacity for
three years, after which it must be replaced.
5019 318 33001
PRODUCT SHEET
FIG. 1
D
F
NL
E
GB
FIG. 2
FIG. 3
P
I
GR