Whirlpool AKR 968 IX 사용 설명서 지침 - 페이지 6

{카테고리_이름} Whirlpool AKR 968 IX에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AKR 968 IX 10 페이지. Decorative deep silent stainless steel cooker hood, akr 968 ix
Whirlpool AKR 968 IX에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지)

페이지 인쇄

Electrical connection

The mains voltage must match that given on the rating plate

located inside the hood. If provided with a plug, connect the

hood to a socket complying with the current regulations and

located in an accessible area. If it does not have a plug (direct

connection to the power supply) or if the plug is not in an

accessible place, fit a suitable double-pole switch that ensures

complete disconnection from the power supply in category III

overvoltage conditions, complying with the installation rules.

WARNING: Before reconnecting the hood circuit to the

power supply and checking correct operation, always make sure

the power cable is correctly fitted and that it was NOT crushed

in its housing during installation. Make sure to have this operation

carried out by a specialised technician.

Cleaning the hood

WARNING! Failure to remove oil/grease (at least once a

month) could result in fire.

Use a soft cloth with a neutral detergent. Never use abrasive

substances or alcohol.

Before using the hood

Please read these instructions carefully and keep them for future

reference, in order to ensure best use of your hood.

The packing materials (plastic bags, polystyrene, etc.) are a

potential source of danger and must be kept out of the reach of

children.

Make sure the hood has not been damaged during transport.

Declaration of conformity

This product has been designed, manufactured and put on the

market in conformity with:

- safety objectives of the "Low Voltage" Directive 2006/95/EC

(which replaces 73/23/EEC as amended)

- protection requirements of "EMC" Directive 89/336/EEC

amended by Directive 93/68/EEC.

Troubleshooting guide

If the hood does not work:

•

Is the plug properly inserted in the power socket?

•

Is there a power failure?

If the hood is not extracting enough:

•

Is the right speed selected?

•

Do the filters need cleaning or replacing?

•

Are the air outlets blocked?

If the lamp does not work:

•

Does the lamp need replacing?

•

Is the lamp correctly fitted?

5019 318 33305

H RUS BG RO

AFTER-SALES SERVICE

Before calling the After-Sales Service

1. Check to see if you can fix the problem yourself (see

"Troubleshooting Guide").

2. Switch the appliance off and then on again to check if the

problem has been eliminated.

3. If the problem persists, contact the After-Sales Service.

Specify:

•

the type of fault,

•

the product model given on the dataplate inside the hood,

visible on removing the grease filters,

•

your full address,

•

your telephone number and area code,

•

the Service code (the number under the word SERVICE on

the dataplate inside the hood, behind the grease filter).

If any repairs are necessary, contact an authorised Service Centre

(to ensure the use of original spare parts and correct repair).

Failure to comply with these instructions can compromise the

safety and quality of the product.