Whirlpool BE1900 사용 설명서 - 페이지 7

{카테고리_이름} Whirlpool BE1900에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool BE1900 12 페이지. Cooker hood

Mounting the hood body

• Before attaching the hood body, tighten the two screws Vr lo-

cated on the hood body mounting points.

• Hook the hood body onto the screws 12a.

• Fully tighten the support screws 12a.

• Adjust the screws Vr to level the hood body.

DUCTED VERSION AIR EXHAUST SYSTEM

When installing the ducted version, connect the hood to the

chimney using either a flexible or rigid pipe ø 150 or 120mm, the

choice of which is left to the installer.

To install a ø 150 pipe

• To install the dumper 10

• Fix the pipe in position using sufficient pipe clamps (not sup-

plied).

To install a ø 120 pipe

• To install a ø 120 mm air exhaust connection, insert the re-

ducer flange 9 on the dumper 10.

• Fix the pipe in position using sufficient pipe clamps (not sup-

plied).

• Remove any activated charcoal filters.

RECIRCULATION VERSION AIR OUTLET

• Push fit connection 15 onto the hood body outlet.

• Insert the connection extension pieces laterally 14.1 in connec-

tion 15.

• Make sure that the outlet of the extension pieces 14.1 is hori-

zontally and vertically aligned with the chimney outlets. If this

is not the case, adjust the position by either reversing the con-

nection extension pieces 14.1 and then reassemble as described

previously.

• Ensure that the activated charcoal filters have been inserted.

Connections

12a

ø 150

ø 120

14.1

7 7