Whirlpool GH6177XPB 설치 지침 매뉴얼 - 페이지 10

{카테고리_이름} Whirlpool GH6177XPB에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool GH6177XPB 24 페이지. Microwave hood combination
Whirlpool GH6177XPB에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (9 페이지)

페이지 인쇄

1. Installation Instructions

5. Cut the 1 " (3.8 cm) diameter hole at the circular shaded area

"G" on the template. This hole is for the power supply cord.

NOTE: If upper cabinet is metal, the supply cord bushing needs to

be installed around the supply cord hole, as shown.

A. Metal cabinet

B. Power supply cord bushing

6. Drill 3/8" (10 mm) holes at points "D" and "E" on the template.

These are for two 1/4-20 x 3" round-head bolts and washers

used to secure the microwave oven to the upper cabinet.

For Roof Venting Installation Only

7. Cut 3/4" (19 mm) hole at one corner of the shaded rectangular

area "F" on Upper Cabinet Template.

8. Using a keyhole saw, cut out the rectangular area.

Install Damper Assembly

(for wall venting only)

1. Check that damper blade moves freely, and opens toward the

wall fully.

2. Push damper assembly through opening in mounting plate so

that tabs in damper assembly lock damper assembly against

mounting plate. Long tab of damper assembly must be to left

side of mounting plate.

A. Mounting plate

B. Mounting plate opening

C. Damper assembly

D. Long tab

E. Damper blade

Install the Microwave Oven

WARNING

Excessive Weight Hazard

Use two or more people to move and install

microwave oven.

Failure to do so can result in back or other injury.

IMPORTANT: The control side of the unit is the heavy side.

Handle the microwave oven gently.

1. Place a washer on each 1/4-20 x 3" bolt and place inside

upper cabinet near the 3/8" (10 mm) holes.

2. Make sure the microwave oven door is closed and taped shut.

3. Using 2 or more people, lift microwave oven and hang it on

support tabs at the bottom of mounting plate.

NOTE: Do not grip or use the door or door handle during

installation.

A. Mounting plate

B. Support tabs