Whirlpool GZ7736XGS1 설치 지침 및 사용 및 관리 매뉴얼 - 페이지 12

{카테고리_이름} Whirlpool GZ7736XGS1에 대한 설치 지침 및 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool GZ7736XGS1 36 페이지. 30" (76.2 cm) and 36" (91.4 cm) slide-out vent range hood
Whirlpool GZ7736XGS1에 대해서도 마찬가지입니다: 부품 목록 (4 페이지)

페이지 인쇄

Whirlpool GZ7736XGS1 설치 지침 및 사용 및 관리 매뉴얼

1. Installation Requirements

Front trim kits for matching the front panel to your range or

cooktop color are available from your dealer.

For ordering information see the "Assistance

or Service" section.

For 30" (76.2 cm) model series

KWVU205:

Part No. 4360201 (white)

Part No. 4360203 (black)

Part No. 4392855 (biscuit)

For 36" (91.4 cm) model series

KWVU265:

Part No. 4360202 (white)

Part No. 4360204 (black)

Part No. 4392856 (biscuit)

For 30" (76.2 cm) model series

GZ7730:

Part No. 4396067 (white)

Part No. 4396066 (black)

Part No. 8171368 (biscuit)

IH5302:

Part No. 4396844 (white)

For 36" (91.4 cm) model series

GZ7736:

Part No. 4396069 (white)

Part No. 4396068 (black)

Part No. 8171369 (biscuit)

Install Front Trim Kit

1. Pull out on the range hood for easier access to the screws.

2. Remove the 3 mounting screws directly behind the front

panel, and remove the front panel from the range hood.

A. Three mounting screws

3. Remove existing trim piece and insert new trim piece.

4. Reattach front panel using the 3 mounting screws.

5. Push the range hood back in.

RANGE HOOD USE

The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the hood before

cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen.

_ t,j

%xf %,1%_

%1_,,,1÷@

A. Light button

B. Speed buttons

Operating

the Fan

1. Slide the shelf forward.

2. Press the speed buttons for the desired speed.

Speed may be increased, decreased, or turned off at anytime

during the vent hood operation. The indicator light next to the

speed button selected should be on when the fan is running.

3. Press the 0 button or close the shelf to shut off the fan.

The fan will shut off when the shelf is about 2" (5.1 cm) from

the closed position. When the shelf is opened the fan will

operate at the last setting.

Operating

the Light

1. Open the shelf about 1" (2.5 cm).

2. Press the light button.

The light will be on each time the shelf is opened. The light

can be used for a night light by opening the shelf about

1" (2.5 cm).

3. Press the light button to turn off the light.

Another option for turning off the vent hood light is to close

the shelf.