Whirlpool GZ9736XSS 설치 지침 및 사용 및 관리 설명서 - 페이지 8

{카테고리_이름} Whirlpool GZ9736XSS에 대한 설치 지침 및 사용 및 관리 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool GZ9736XSS 32 페이지. 30" (76.2 cm) and 36” (91.4 cm) wall-mount canopy range hood
Whirlpool GZ9736XSS에 대해서도 마찬가지입니다: 치수 매뉴얼 (1 페이지)

페이지 인쇄

Wood Frame Installation - Style 2

(optional before drywall installation)

1. Construct wood wall framing so that it is flush with interior

surface of wall studs. The framing must be centered over the

installation location. The height of the framing must allow for

the mounting bracket to be secured to the framing within the

dimensions shown.

A. 5

" (12.9 cm)

B. 38

" to 44

" (96.7 cm to 111.9 cm) above cooktop

C. Centerline

2. After the wall surface is finished, drill two

holes.

3. Install the mounting bracket to the frame using

two 4.8 x 38 mm pan head mounting screws.

Install Flue Mounting Bracket

1. Assemble the flue mounting bracket by attaching the 2 side

brackets to the center bracket using the 2 flat head bracket

screws provided. Adjust outside width as shown.

A. 3.9 x 5.7 mm flat head bracket screws

B. 9

" (24.9 cm)

2. Center the mounting bracket directly over the range hood

location.

3. Drill two

" pilot holes for drywall anchors.

4. Install drywall anchors.

" (4 mm) pilot

5. Attach the flue mounting bracket to the ceiling using

two 4.8 x 38 mm pan head mounting screws.

A. Flue mounting bracket

B. Hood mounting bracket

C. Centerline

D. Cooktop surface

Prepare Range Hood

NOTE: Remove the plastic film from all exterior surfaces of the

hood and decorative flues, prior to final installation.

Vented Installation

Install the damper into the duct connector of the range hood.

A. Damper

B. Duct connector

Non-vented (recirculating) Installation

Damper supplied with hood is not required in a non-vented

(recirculating) installation. Install the 5" (12.7 cm) to 6" (15.2 cm)

adapter supplied with the Charcoal Filter Kit, Part Number

8212566. See "Assistance or Service" section to order.

A. 5" (12.7 cm) to 6" (15.2 cm) adapter

B. Blower collar