Whirlpool HE2421 사용, 관리 및 설치 매뉴얼 - 페이지 11

{카테고리_이름} Whirlpool HE2421에 대한 사용, 관리 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool HE2421 40 페이지.

페이지 인쇄

(6)

Delay Off / Alarm

Delay off

Press this button once to enable delay off.

The default fan speed is 3. The 2

memorized fan speed.

The default time is 5 minutes. The 2

memorized time.

The delay off process will start with one beep sound and end by two

beep sound with light turn off as well.

Time set for delay off or alarm will be range from 1 min to 10 hrs. Press

Fan (+) button to increase time and L/R ( - ) button to decrease time.

Alarm

Press this button twice to enable alarm function.

The default time is 1 min. The 2

memorized time.

The alarm function will start with one beep sound. When time is up,

the display will illuminates "0.00" with 15 times beep sound. Press any

button to stop the beep sound, the display of "0.00" will be disappeared,

and then resume the original operating status. Or simply press the

On/Off (

Time set for delay off or alarm will be range from 1 min to 10 hrs. Press

Fan (+) button to increase time and L/R ( - ) button to decrease time.

Delay off or Alarm cannot be enabled at the same time.

When delay off or alarm function is enabled, auto clean cannot functioned.

(7)

Auto Clean

When fans are on or off,press this button to enable the auto clean.

- The hood shall be cleaned by using hood cleaner/detergent. Please do

not use abrasive cleaner/detergent which will damage the machine.

Cleaning Steps:

a. Mix the cleaner/detergent and water by pouring them

to the marked level of the provided water jug. (the cleaner

/detergent : water = 1:12).Pour the cleaner/detergent

mixture in the water inlet as shown in the picture.

b. If the cleaner/detergent mixture comes out from

the excess water hole down into the oil cup, it means

that inside water tank is full and no more shall be

poured into the water tank.

c. Press the Auto Clean (

beep sound. The fans will change to low speed for

3 seconds, and then the water pump will operate for 10 seconds.

Then fans change to high speed and start cleaning for 25 seconds.

The auto clean process will end with two beep sounds.

d. Dirty oil/water will be flowed into the oil cup.

When auto clean is enabled, press On/Off ( ) button to cancel at anytime.

If the water level is low, the hood will have beep sound and with display

indication. Refill with water and press Auto Clean (

cleaning process.

After operation of 15 hours, there will be clean reminder shown on display

every time when you turn off the machine. The reminder display disappear when

you enable the auto clean function or pressing On/Off (

OOD

) button to turn off the machine.

) button to start with one

PERATION

time usage will follow the last

cleaner/detergent

water inlet

water tank

Excess water hole

) button to continue

) button for 3 seconds.

Water