Whirlpool UXD8636DYS 설치 사용 및 관리 지침 - 페이지 13

{카테고리_이름} Whirlpool UXD8636DYS에 대한 설치 사용 및 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool UXD8636DYS 40 페이지. 30 76.2 cm and 36 91.4 cm retractable pop-up downdraft vent system
Whirlpool UXD8636DYS에 대해서도 마찬가지입니다: 설치 지침 및 사용 및 관리 매뉴얼 (36 페이지)

페이지 인쇄

6. Hold the wire-mounting plate and push the grommet out

of the wire-mounting plate.

A. Wire-mounting plate

B. Grommet

7. Slide the wire assembly through the slot in the wire-mounting

plate to remove it.

8. Place the wire assembly through the opening to the opposite

side of the vent box.

9. Reassemble the wire assembly and grommet to the

wire-mounting plate.

10. Install the wire mounting plate to the vent box using the

four screws previously removed.

11. Place the blower motor box assembly with the keyhole slots

over the two shoulder screws on the rear of the vent box and

reconnect the wire connection to the blower motor.

12. Mount the blower motor box to the vent box and secure

using the six screws previously removed.

13. Mount the 5

" (13.4 cm) cover box (supplied) to the front of

the vent box. Place the keyhole slots over the two shoulder

screws, align the mounting holes, and secure the cover box

to vent box using the six screws previously removed from

the 1/4" (6.4 mm) deep cover.

14. Remove the front cover from the deep cover, place the front

cover over the previously mounted cover box, and secure

using the four screws previously removed.

A. Deep cover

B. Front cover

C. Cover box (supplied)

15. Go to the "Complete Installation" section.