Whirlpool UXT3030AYB0 설치 지침 및 사용 및 관리 매뉴얼 - 페이지 4

{카테고리_이름} Whirlpool UXT3030AYB0에 대한 설치 지침 및 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool UXT3030AYB0 36 페이지. 30" (76.2 cm) and 36" (91.4 cm) range hoods

Whirlpool UXT3030AYB0 설치 지침 및 사용 및 관리 매뉴얼
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
Tools needed (all models)
Drill
1V4" (3.0 cm) drill bit
1/8"(3.0 mm) drill bit for pilot holes
Pencil
Wire stripper or utility knife
Tape measure or ruler
Caulking gun and weatherproof
caulking compound
Flat-blade screwdriver
Phillips screwdriver
Saber or keyhole saw
Metal snips
Compass or 8" (20.3 cm) circle template
Parts Supplied (all models)
T-10 Torx ®tadapter
T-20 Torx ®tadapter
4- 4.5 x 13 mm mounting screws
Parts Needed
(all models)
3 - UL listed wire connectors
Vent clamps/duct
tape as required
For cabinets
with recessed
bottoms:
Two 2" (5.1 cm) wide filler strips. Length and thickness
determined by recess dimensions.
Four flat head wood screws or machine screws with washers
and nuts (to attach filler strips).
Parts needed
31/4"x 10" (8.3 x 25.4 cm) rectangular metal vent system
Wall or roof cap with damper to match vent system
1 - 75W max, 120V incandescent
light bulb
Models UXT4030AY/UXT4036AY
(recirculation installation only)
Parts needed
1 - 75W max, 120V incandescent light bulb
Models
UXT4230AY/UXT4236AY
(vented or non-vented
[recirculation]
installation)
Parts supplied
Remove parts from package. Check that all parts are included.
2 - 3.5 x 9.5 mm screws
31/4"x 10" (8.3 x 25.4 cm) rectangular vent connector
Parts needed
1 - 75W max, 120V incandescent
light bulb
Wall or roof cap with damper to match vent system
For 7" (17.8 cm) round vented installations:
7" (17.8 cm) round metal vent sytem
7" (17.8 cm) round damper. For information on ordering, see
the "Accessories"
section.
7" (17.8 cm) round vent mounting plate. For information on
ordering, see the "Accessories" section.
For 31/4 '' x 10" (8.3 x 25.4 cm) rectangular
vented installations:
31/4"x 10" (8.3 x 25.4 cm) rectangular metal vent system
For non-vented (recirculation) installations:
Charcoal filter kit. For information on ordering, see the
"Accessories"
section.
Models
UXT2030AY/UXT2036AY
(vented installation)
Parts supplied
Remove parts from package. Check that all parts are included.
2 - 3.5 x 9.5 mm screws
7" (17.8 cm) round vent mounting plate
Parts needed
7" (17.8 cm) round metal vent system
Wall or roof cap with damper to match vent system
1 - 75W max, 120V incandescent
light bulb
Models
UXT3030AY/UXT3036AY
(vented installation)
Parts supplied
Remove parts from package. Check that all parts are included.
2 - 3.5 x 9.5 mm screws
31/4"x 10" (8.3 x 25.4 cm) rectangular vent connector
Models UXT5230AY/UXT5236AY
(vented or non-vented [recirculation] installation)
Parts supplied
Remove parts from package. Check that all parts are included.
2 - 3.5 x 9.5 mm screws
31/4"x 10" (8.3 x 25.4 cm) rectangular damper/vent
connector
Parts needed
Wall or roof cap with damper to match vent system
For 7" (17.8 cm) round vented installations:
7" (17.8 cm) round metal vent sytem
7" (17.8 cm) round damper. For information on ordering, see
the "Accessories"
section.
7" (17.8 cm) round vent mounting plate. For information on
ordering, see the "Accessories" section.
For 31/4 '' x 10" (8.3 x 25.4 cm) rectangular
vented installations:
31/4"x 10" (8.3 x 25.4 cm) rectangular metal vent system
For non-vented (recirculation) installations:
Charcoal filter kit. For information on ordering, see the
"Accessories"
section.
1-®TORX is a registered trademark
of Saturn Fasteners,
Inc.