Whirlpool UXT5230BD 설치 지침 및 사용 및 관리 매뉴얼 - 페이지 11

{카테고리_이름} Whirlpool UXT5230BD에 대한 설치 지침 및 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool UXT5230BD 30 페이지. 30" (76.2 cm) and 36" (91.4 cm) range hood
Whirlpool UXT5230BD에 대해서도 마찬가지입니다: 설치 지침 및 사용 및 관리 매뉴얼 (30 페이지)

페이지 인쇄

To Replace the Filter:

1. To reinstall the filter, place the back edge of the filter into the

channel at the rear of the range hood.

2. Pull the filter latch toward the front of the range hood and

push the front of the filter up into place.

3. Release the filter latch. It will spring back into place to secure

the filter.

4. Replace the screw in the filter retainer.

Replacing a Halogen Lamp

Turn off the range hood and allow the halogen lamp to cool. To

avoid damage or decreasing the life of the new lamp, do not

touch the lamp with bare fingers. Replace the lamp, using tissue

or wearing cotton gloves to handle the lamp.

If new lights do not operate, make sure the lamps are inserted

correctly before calling service.

SE119A

WIRING DIAGRAM

Gnd

Ground

Screw

1. Disconnect power.

2. Use a flat-blade screwdriver and gently pry the light cover

loose.

3. Remove the lamp and replace it with a 120-volt, 40-watt

maximum, halogen lamp made for a G-9 base.

4. Replace the light cover.

5. Reconnect power.

Switch Operation

L-1

Lamps 120 V 1.5 Ohms

L-2 Speed 1 120 V 1.5 Ohms

L-3 Speed 2 120 V 2.0 Ohms

Speed 3

2.5 Ohms

L-4

120 V

BK (Line)

GY (Speed 3)

BR (Speed 1)

8uF

Power Supply

Wattage Rating

Red - Brown

Red - Black

Red - Gray

Red - White

S15

Mechanical push buttons

4 buttons

3 speeds

Y (Lamp)

R (Speed 2)

Motor Characteristics

120 VAC

Frequency

60 Hz

Amperage

0.9 ±10% A

110 Watts

Motor Resistance

27.5 ±10% Ohms

55.7 ±10% Ohms

86.8 ±10% Ohms

117.7 ±10% Ohms