Whirlpool UXT5236AY 설치 지침 및 사용 및 관리 매뉴얼 - 페이지 13

{카테고리_이름} Whirlpool UXT5236AY에 대한 설치 지침 및 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool UXT5236AY 32 페이지. 30" (76.2 cm) and 36" (91.4 cm) range hood
Whirlpool UXT5236AY에 대해서도 마찬가지입니다: 설치 지침 및 사용 및 관리 매뉴얼 (36 페이지), 설치 지침 및 사용 및 관리 매뉴얼 (32 페이지), 설치 지침 및 사용 및 관리 매뉴얼 (34 페이지)

To Replace the Filter:

1. To reinstall the lter, the single slot opening on the long edge

of the lter is to be toward the front of the range hood. Place

the back edge of the lter into the channel at the rear of the

range hood.

2. Pull the lter retainer toward the front of the range hood and

push the front of the lter up into place.

3. Release the lter retainer. It will spring back into place to

secure the lter.

4. Replace the screw into the lter retainer.

Replacing the Halogen Lamp

Turn off the range hood and allow the halogen lamp to cool. To

avoid damage or decreasing the life of the new lamp, do not

touch lamp with bare ngers. Replace lamp, using tissue or

wearing cotton gloves to handle lamp.

If new lamps do not operate, make sure the lamps are inserted

correctly before calling service.

1. Disconnect power.

2. Use a at-blade screwdriver and gently pry the light cover

loose.

3. Remove the lamp and replace with a 120-volt, 40-watt

maximum, halogen lamp made for a G-9 base.

4. Replace the light cover.

5. Reconnect power.