Whirlpool W10292168D 설치 지침 및 사용 및 관리 매뉴얼 - 페이지 10

{카테고리_이름} Whirlpool W10292168D에 대한 설치 지침 및 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool W10292168D 28 페이지. 36" (91.4 cm) island-mount canopy range hood

페이지 인쇄

1. For non-vented (recirculating) installations only, install

charcoal filters over grille on blower housing. See the "Range

Hood Care" section.

2. Install metal filters. See the "Range Hood Care" section.

The range hood is designed to remove smoke, cooking vapors

and odors from the cooktop area. For best results, start the hood

before cooking and allow it to operate several minutes after the

cooking is complete to clear all smoke and odors from the

kitchen.

The hood controls are located on the front side of the canopy.

A. Duct cover holes

B. Duct cover

C. Control panel

D. Glass canopy

Complete Installation

RANGE HOOD USE

E. Halogen lamps

F. Grease filter

G. Grease filter release handle

3. Check the operation of the range hood blower and light. See

the "Range Hood Use" section.

If range hood does not operate, check to see whether a

circuit breaker has tripped or a household fuse has blown.

NOTE: To get the most efficient use from your new range hood,

read the "Range Hood Use" section.

Operating the light

The On/Off light button controls both lights. Press once for On

and again for Off.

Operating the blower

The Blower Speed buttons turn the blower on and control the

blower speed and sound level for quiet operation. The speed can

be changed anytime during fan operation by pressing the desired

blower speed button.

The Blower Off button turns the blower Off.

Range Hood Controls

A. On/Off light button

B. Blower Off button

C. Blower speed minimum button

D. Blower speed medium button

E. Blower speed maximum button