Whirlpool WVI30336LS 설치 지침 및 사용 및 관리 매뉴얼 - 페이지 8
{카테고리_이름} Whirlpool WVI30336LS에 대한 설치 지침 및 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool WVI30336LS 32 페이지. 30" and 36" (76.2 and 91.4 cm) island-mount canopy range hood
페이지 인쇄
Install In-Line Smart Kit - Optional
NOTE: Your range hood can work with either an internal or an
inline (external) blower motor system. An optional In-Line Smart
Kit (purchased separately) allows the blower motor that comes
with this range hood to be installed in a location other than
inside the range hood cavity.
CAUTION: To reduce the risk of fire and electric shock, install
this range hood only with the In-Line Smart Kit manufactured by
Whirlpool. See the "Assistance or Service" section to order.
For installation see the In-Line Smart Kit installation instructions.
See the "Assistance or Service" section to order.
Assemble Range Hood
1. Install transition on top of hood (if removed for shipping) with
2 - 3.5 x 9.5 mm sheet metal screws.
B
A. Vent transition
B. 3.5 x 9.5 mm screw
2. Install the lower horizontal support to 4 lower vertical
supports with 8 - 4.2 x 8 mm screws.
A
B
C
A. Lower horizontal support
B. 8 - 4.2 x 8 mm screws
C. 4 Lower vertical supports
8
3. Install 4 upper vertical supports to the lower horizontal
A
4. Install the structure to the upper horizontal support with
support with 16 - 4.2 x 8 mm screws.
A
B
A. 4- Upper vertical supports
B. 16 - 4.2 x 8 mm screws
C. Lower horizontal support
16 - 4.2 x 8 mm screws.
NOTE: Attach the structure to the previously installed upper
horizontal support.
A
B
B.
A. Vent transition
B. 3.5 x 9.5 mm screw
C