AER Compact XL 사용자 설명서 - 페이지 14

{카테고리_이름} AER Compact XL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AER Compact XL 20 페이지.
AER Compact XL에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄
AER Compact XL 사용자 설명서
Compact XL
CXL_IB_120731

3.2 Rear side

1) gnd lift
Disconnects signal ground from
protective ground, thereby elimina-
ting hum problems with so-called
ground loops. This button should
CXL_IB_120731
normally remain switched off (i.e.
not pressed).
2) 9 V
Activates the 9 V phantom power,
off = not pressed, see 5.4).
3) level
Aux-Signal level control
4) aux in L/R: Auxiliary input for additional signal
sources like e.g. CD player. RCA sok-
kets (white = left channel, red = right
channel)
5) footswitch: connection to a double footswitch to
switch internal and external effect
on and off. (Tip = internal Effect ch.
3, Ring = internal Effect ch. 4 on/off ).
6.3 mm stereo jack socket.
6) tuner:
Output to an external tuner. May
also be used when input is muted.
6,3 mm mono jack socket.
7) line out:
6,3 mm mono jack socket, preamp
output post master, f. eg. to connect
an additional cabinet
8) level:
Signal level control at the DI output
9) DI-out:
Balanced preamp output,
14
gnd
9 V
level
aux in
footswitch
The Acoustic People
lift
L
R
phantom
tip = int. e .
power
ring = ext. e .
gnd
9 V
level
aux in
footswitch
lift
L
1
2
3
4
R
phantom
tip = int. e .
power
ring = ext. e .
tuner
line out
level
tuner
line out
level
8
5
6
7
10) send:
11) return:
12) phones:
13) power on: Combined power switch with fuse
DI-out
send
return
DI-out
send
return
9
10
11
pre master, post EQ, with aux in and
effects. XLR socket.
Output to the input of an external
effects unit. 6,3 mm mono jack
socket.
Input for the output signals of an
external effects processor (left/right
channel with separate 6,3 mm mono
jack sockets).
Output for a stereo headphone set.
6,3 mm stereo jack socket.
!!! Never use mono jack
plugs, otherwise the amp
could be damaged !!!
holder and IEC mains socket
headphones
headphones
12
13