Fireside mantels & surrounds Kenwood Flush 어셈블리 설치 매뉴얼 - 페이지 5

{카테고리_이름} Fireside mantels & surrounds Kenwood Flush에 대한 어셈블리 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fireside mantels & surrounds Kenwood Flush 6 페이지.

CAUTION: ALDER IS A HARD WOOD AND PRONE TO

SPLITTING. IF THIS MANTEL IS MADE FROM ALDER

IT IS RECOMMENDED TO PREDRILL 1/16" HOLES ON

THE INSIDE SCRIBE PIECES PRIOR TO ATTACHING

THEM TO THE MANTEL TO AVOID SPLITTING.

Attach the scribe, making sure it is pushed back against noncom-

bustible facing. Nail with 4D finishing nails (provided), breast board

first. Be careful not to hit the stone as you nail the scribe in place.

Protect the stone with a piece of corrugated cardboard held or

taped between stone and hammer as you nail.

11.

Caulk the mantel to the wall all the way around, using a caulk

that matches your mantel color. This will eliminate any remain-

ing gap between mantel and wall.

www.fireplaces.com

10.

If using a hearth that fits between the leg opening, cut the scribe

to allow for stone height between the legs. Place the scribe molding

as shown above, positioning it so that it just contacts the non-

combustible surround. Be careful not to hit the facing material

when nailing the scribe in place. No cutting is needed if hearth

exceeds mantel legs.

YOUR INSTALLATION IS COMPLETE.

Cut scribe to

fit stone.

6200-002

REV. A

04.16.2009