Caldertech Calderprep Plus 사용 설명서 - 페이지 8

{카테고리_이름} Caldertech Calderprep Plus에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Caldertech Calderprep Plus 16 페이지. Rotary scraping tool 20-63mm

Operating Instructions

Calderprep Plus Rotary Scraping Tool 20-63mm

9. Begin to turn the whole tool clockwise using the crank handle. As the

tool is turned it will automatically advance the scrape down the pipe.

10. It may b e necessary to pause scraping to remove excess peel.

Removal

Whe n the scrape is complete push down once again on the rear of

the arm and put the arm spring clip in place to keep the arm raised

away from the pipe.

2. Remove the mandrel head from the pipe If there is difficulty

removing it, turn (the mandrel only), anticlockwise to remove.

Storage

IMPORTANT! When not in use always:

Ensu re the tool is clean and dry before storage.

2. Alway s store in the tool case provided.

Routine Maintenance

1 . Check for correct movement and operation and lubricate moving

parts at re gular intervals before using.

2. It is impor tant to ensure all component parts are present and in

serviceable condition.

04. Operation