Clarinet Systems EtherUSB EA104 사용자 설명서 - 페이지 7

{카테고리_이름} Clarinet Systems EtherUSB EA104에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarinet Systems EtherUSB EA104 19 페이지. Usb ethernet access point for pda
Clarinet Systems EtherUSB EA104에 대해서도 마찬가지입니다: 사양 (2 페이지), 사양 (2 페이지), 사용자 설명서 (11 페이지), 사용자 설명서 (15 페이지)

페이지 인쇄

3 CONFIGURATION

3.1 PDA support

The EA104 currently supports PDAs running PPC 2003, CE/Net 4.1 & 4.2, CE5.0 and

Windows Mobile 5.0 (see Appendix B.)

3.2 EtherUSB web-based Administration Tool (AdminTool)

The EtherUSB web-based AdminTool can be accessed via Internet Explorer browsers.

This tool provides the following functions:

• Use static IP or DHCP for EtherUSB

• Setup IP address, Subnet Mask, Gateway, WINS and DNS information when using

static IP.

• Setup NAT configuration for the USB ports

• Setup network identification such as device name and domain name for the

EtherUSB

• Change password

• Review reports of critical changes

•

Update firmware

3.3 Access AdminTool and change EA104 initial values

DHCP is the default setting in EA104 and the device will obtain one IP address from a

DHCP server once connected to a network. IP addresses of USB ports are assigned by an

internal NAT function. To change the settings, please access the EA104 through the

AdminTool. To access the AdminTool, open your Internet Explorer browser and enter the

URL using the IP address of the EA104 as shown below.

http://<EA104 IP address>:9876/

User name: admin

Password:

password

If the network contains a WINS server, you may use the device name of the EA104 in place

of the IP address. That is http://<device name>:9876/. For example:

http://EA4000100:9876.

All fields will be overwritten when restoring factory defaults by pushing the Reset Button for

8 seconds or longer.

Clarinet Systems, Inc.

(Note syntax: http://<IP address><colon>9876/ )

//www.clarinetsys.com

Page 7