Fireside Lodge Barnwood Bunk Bed 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} Fireside Lodge Barnwood Bunk Bed에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fireside Lodge Barnwood Bunk Bed 6 페이지.

6. If you have a King or Queen bed, at this time, lay the 2 T-support pieces on the floor under the bottom bunk.

This will ease later assembly in Step #9.

7. Install slats on the bottom portion (DO NOT OVERTIGHTEN – as slats will crack – recommend to pre-drill

holes). Important! For safety, the slats at the head and foot must be spaced so the gap to the headboard

and to the footboard is 3" or less. The remaining slats may be evenly spaced between the two end slats.

8. Install plywood bunk board on the upper portion of the bed and secure with (8) 2" wood screws provided –

screw the plywood down onto the bottom bunk rail in 4 places on each side. Important! For safety, the plywood

must be positioned so the gap to the headboard and to the footboard is 3" or less.

Barnwood Bunk Bed Assembly Instructions

Page 4