AER 9000-0043-8911 사용자 설명서 - 페이지 4
{카테고리_이름} AER 9000-0043-8911에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AER 9000-0043-8911 16 페이지.
페이지 인쇄
2. Safety Instructions
The following guidelines shall help minimize the risk of injury through fire or electric shock.
C AU T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AT T E N T I O N
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
1.
Carefully read these safety notes before you
use the device!
2.
Keep these safety notes in a safe place.
3.
Pay attention to all warnings, instructions and
additional texts on the unit.
4.
This device was only designed for operation
under normal climatic conditions (temperate
climate).
5.
Do not install or use your amp in close proximi-
ty to water or if you are wet yourself.
6.
Do not subject your device to sudden and
severe temperature changes. This could cause
moisture condensation inside the unit, which
could damage it. In the event of moisture
condensation allow the device to dry out com-
pletely before use.
7.
Use your amp in a safe place where nobody can
step on cables or trip over and damage them.
8.
Pay attention to an unhindered air circulation
around the amp, never obstruct the air vents or
grilles.
9.
Always pull the mains plug before cleaning
your amp or when left unused for a long period
of time. Use only a dry cloth for cleaning. Avoid
the use of detergents and do not let any liquids
seep into the unit.
10. Use only the right fuses with the same current
rating and trigger characteristic as replace-
ments. Never mend fuses! Pull the mains plug
before replacing a fuse. Should a fuse blow
again after a short while, the device needs to
be checked.
11. Never install your amp close to devices with
strong electromagnetic fields such as large
mains transformers, revolving machines, neon
illumination etc. Do not lay signal cables paral-
lel to power current cables.
12. There are no user-serviceable components
inside the unit. To avoid the risk of an electric
4
The lightning flash with
the arrow head symbol
within an equilateral
triangle is intended to alert the
user to the presence of unisolated
´dangerous voltage´ within this
product´s enclosure that may
be of sufficient magnitude to
constitute a risk of electric shock
to persons.
13. In keeping with the EMV regulations screened
14. Always use an earthed power supply with the
15. Cable up your amp only when it is powered off.
16. This device should be installed near the socket
17. This product may cause permanent hearing
18. The product should be located away from heat
19. Do not place any open sources of fire, like
20. Care should be taken so that objects do not fall
21. Do not place this device on an unstable
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying this product.
shock, the unit must not be opened. All main-
tenance, adjustment and repair works should
be carried out by qualified staff only. Any
unauthorized tampering will void the 2-year
warranty.
cables with correctly fitted connectors must be
used for all signal connections.
correct mains voltage. If you are in doubt about
the power outlet ground, have it checked by a
qualified technician.
outlet and disconnection of the device should
be easily accessible. The mains plug of the
powersupply shall remain readily operable.
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles and the point where they exit from
the apparatus.
loss. Do not operate for long periods of time
at a high volume level or at any level that is
uncomfortable. If you experience any hearing
loss or ringing in the ears, you should consult
an audiologist.
sources such as radiators, heat registers or
other products that produce heat.
candles, on the device.
onto the device and liquids are not spilled into
the enclosure through openings. Ensure that
no objects filled with liquids, such as vases, are
placed on the device.
cart, stand, tripod, bracket or table. The
device may fall, causing serious injury to you
and serious damage to the device itself.
The exclamation point
within an equilateral
triangle is intended to