fireStorm SEQ18 사용자 설명서 - 페이지 11
{카테고리_이름} fireStorm SEQ18에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. fireStorm SEQ18 14 페이지.
페이지 인쇄
TRIGGER INPUT
The sequencer is very flexible and may be triggered in several ways.
The Trigger Input LED will light whenever an external trigger is sensed. This is useful
for setup and testing.
The sequencer will only fire channels when key is in the ARM position. The ARM LED
will be on whenever the key is in ARM position.
Fire Button Trigger
The sequencer can be triggered by pressing the FIRE button on the front panel.
Current Trigger
Current from an external firing system or our dedicated trigger unit can trigger the
sequencer. By default, the Trigger Input terminals are connected to the Current Mode input
on the circuit board.
Contact Closure Trigger (optional with Deadman Switch)
A Contact Closure input connector can be fitted. This allows the optional Deadman Switch to
be used or any other contact closure input. Please contact us for more information.
10 of 13