Firetide HotPort 6101 하드웨어 설치 매뉴얼 - 페이지 11

{카테고리_이름} Firetide HotPort 6101에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Firetide HotPort 6101 20 페이지. 6100 series
Firetide HotPort 6101에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (2 페이지)

페이지 인쇄

Mounting the Node

Attach the supplied backing plate to the HotPort node, using the

supplied screws. Note that the holes in the node are pre-tapped for

the supplied metric screws; do not use other screws.

Next, slide the node assembly onto the bracket, so that the four tabs

on the node assembly engage the straps on the bracket, as shown

in the photo.

Figure 6. Mounting the Node

February 2007

Then tighten the four captive screws on the node assembly. This

locks the node onto the bracket. Don't leave these screws loose; if

you do, it's easy to knock the node off the bracket.

Figure . Tighten Screws

Firetide Instant Mesh Networks 11