FIRETRACE 800095-A 설치 매뉴얼 - 페이지 14

{카테고리_이름} FIRETRACE 800095-A에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIRETRACE 800095-A 18 페이지. Dual pressure switch module with & without bypass

페이지 인쇄

Figure 13 – Flanges Installed

3.5.3 Magnetic Mounting Kit

The magnets are secured to the module using the supplied hardware. Magnets are a non-destructive option for mounting the module in place. The

non-permanent nature of this option allows for minor adjustments of the box during installation. Figure 14 below highlights what is provided in the

Magnetic Mounting Kit (P/N 111151). Figure 15 below shows the magnets installed on the module.

Figure 14 – Magnetic Mounting Kit

Figure 15 – Magnets Installed

3.6 Wiring the Module

The cable harness (P/N 203210) needs to be properly secured to the box when installed. Ensure the female connector on the harness is pushed all

the way in before tightening the connector body to the male connector on the box. Tighten to finger tight. Figure 17 below details the pin locations on

the harness. Table 6 indicates the relationship between each pin and wire and the pressure switch associated with them.

Cable shielding can be utilized by connecting directly to the shielding in the cable, if needed.

DIOM 800095-A

7/22/2022