FIRETRACE 800095-A 설치 매뉴얼 - 페이지 5

{카테고리_이름} FIRETRACE 800095-A에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIRETRACE 800095-A 18 페이지. Dual pressure switch module with & without bypass

1 FOREWORD

Safety precautions are essential when any electrical or mechanical equipment is involved. These precautions should be followed when

handling, servicing, and recharging Firetrace Fire Suppression Systems and equipment. If safety precautions are overlooked or ignored,

personal injury or property damage may occur.

The following symbols are used throughout this manual. Always heed these precautions. They are essential to the safe use of the equipment

described in this manual.

DANGER:

This danger symbol identifies immediate hazards and provides specific instructions or procedures, which if not correctly followed WILL

result in severe personal injury or death.

WARNING:

This warning symbol identifies specific instructions or procedures, which if not correctly followed, COULD result in severe personal injury

or death.

CAUTION:

This caution symbol identifies specific instructions or procedures, which if not correctly followed, COULD result in minor personal injury or

equipment or property damage.

The following safety precautions should always be followed:

Pressurized (charged) cylinders are extremely hazardous and if not handled properly are capable of causing property damage, bodily

injury, or death. Always wear safety glasses and make sure the discharge plugs are properly in place before system installation,

servicing, or other general handling.

Read and understand this manual and the other documents referenced herein.

Wear safety glasses when working with pressurized cylinders and charging equipment.

Make sure that the ball valve (attached to the top of the cylinder valve) is closed (lever is in "OFF" position), the detection tubing has

been removed from the cylinder valve and the safety caps installed before removing the cylinder from the installation and before

performing any charging, leak tests or salvage operations.

Follow all the safety procedures included on the cylinder nameplate and in this manual.

Never assume that a cylinder is empty. Treat all cylinders as if they are fully charged.

Any questions concerning the information contained in this Manual should be addressed to:

DIOM 800095-A

Firetrace USA LLC.

Firetrace International LLC

North and South America

8435 N. 90

Scottsdale, AZ 85258 USA

Telephone: 480-607-1218

Fax:480-315-1316

The following web site should be visited for frequent technical announcements

www.firetrace.com

WARNING

St, Suite 2

7/22/2022