Alcohawk PT500 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Alcohawk PT500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alcohawk PT500 16 페이지. Breath alcohol tester
Alcohawk PT500에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지)
페이지 인쇄When the screen displays "Test" and "Options", press the SELECT
button
to view the menu options. Use the SELECT button
down through the menu options. Use the ENTER button
selected menu option.
Alarm Point
The unit will read "High" if the BAC reading exceeds the alarm point set-
ting. The default setting is 0.020% BAC. You can change the alarm point
from between 0.020%-0.080% BAC.
To change the setting press the SELECT button
the desired value on the screen. Press the ENTER button
setting.
Temperature Scale
You can switch between Celsius (C) and Fahrenheit (F) for the tempera-
ture sensor. The default setting is Fahrenheit (F).
To change the setting press the SELECT button
the desired scale. Press the ENTER button
Blowing Time
You can adjust the blowing time from three (3) to eight (8) seconds. The
default setting is five (5) seconds. Five (5) seconds is the standard time
to obtain a proper sample.
Caution: Only adjust this setting if the test subject is not able to
exhale for 5 seconds or if the subject can easily exhale more than
five (5) seconds.
To change the setting press the SELECT button
the desired number of seconds. Press the ENTER button
setting.
MENU OPTIONS
7
to enter the
until the unit shows
to save the
until the unit shows
to save the setting.
until the unit shows
to save the
to move