Alcohawk PT500 빠른 매뉴얼 - 페이지 2

{카테고리_이름} Alcohawk PT500에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alcohawk PT500 2 페이지. Breath alcohol tester
Alcohawk PT500에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지)

페이지 인쇄

BREATH PIPE IN

DISPLAY

To toggle through available menu options, press the SELECT

THIS DEVICE IS INTENDED TO MEASURE ALCOHOL IN THE HUMAN BREATH.

SEE OWNER'S MANUAL FOR RE-CALIBRATION INSTRUCTIONS THAT MUST BE ROUTINELY PERFORMED.

AlcoHAWK® PT500 Quick Guide

BREATH OUT

DO NOT COVER

WHILE TESTING

ON/OFF POWER BUTTON

ENTER BUTTON

SELECT BUTTON

DO NOT DRINK AND DRIVE.

Be sure to read the entire owner's manual and follow procedures

carefully to obtain optimal results.

Operating Instructions

Wait 20 minutes after the test subject smokes, eats or drinks

before testing. Failure to wait 20 minutes can give inaccurate BAC

readings and damage the sensor.

Step 1) Press and hold the ON/OFF power button

you hear a BEEP. The unit reads "Initializing..." as it prepares

for use.

Step 2) The screen displays "Test" and "Options". To start a "Test",

press the ENTER button

Take a deep breath, wrap your lips around the new mouthpiece

and blow steadily for ﬁve (5) seconds. The unit beeps when the

test subject starts blowing and beeps again after obtaining the

sample. Do not cover the BREATH OUT hole.

Step 3) The unit displays "Processing" while analyzing the sample.

After about three (3) seconds, the unit then displays the

estimated BAC.

Step 4) The unit shows the test result for 90 seconds before beeping

twice and shutting off.

Step 5) To turn off the unit, press and hold the ON/OFF power button

for 1 second.

button. See manual for details on the menu options.

for 1 second until

. The unit displays "Blow Now".