DIR Capsule H133W 사용 설명서 - 페이지 3

{카테고리_이름} DIR Capsule H133W에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIR Capsule H133W 6 페이지.

Hook Lock

Stopper

Hook Lock

Machine Head Contact Post

Grooves

Insert of Wall Bracket

Arm Assembly

Arm Assembly & Machine Head

The machine head and the arms are fairly heavy, it is suggested that the

installation is done by two persons, as instructed in the following steps.

1 Remove the screw on the protector plate and rotate the protector plate

anti-clockwise until it is vertical. Remove the hook lock after loosening the

screw.

Protector Plate

2 Stand the machine with head facing floor and keep upright with two

hands. Another person will need to insert the tip of the arm into the

machine head.

3 Reinstall the hook lock to the grove and then tighten the groove screw

firmly.

4 Turn the protector plate clockwise back to its original position and then

tighten the screw at the protector plate either side.

5 Separately, two persons hold up the machine head and the arm assembly

at the same time. Place the arm assembly to the insert of the wall bracket.

Machine Head

6 Remove the stopper and fix it in an opposite way for future spare use.

Only after the installation is complete will you be able to move the arm

assembly up/down, or it will damage the arms.

7 Connect the power cable into the wall socket.