Alcolizer Druglizer LE5 사용자 설명서 - 페이지 14

{카테고리_이름} Alcolizer Druglizer LE5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alcolizer Druglizer LE5 20 페이지. Charging cradle
Alcolizer Druglizer LE5에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 사용자 설명서 (19 페이지), 조립 지침 (3 페이지)

페이지 인쇄

When the BrAC reading is calculated, it will be displayed on the screen together with the

unit of measurement (e.g. g/210L BrAC, g/100ml BAC) and be retained until the recovering

period has ended. The screen colour will vary depending on the percentage of alcohol

present; green for zero to 0.019 g/210L BrAC, yellow for 0.020 g/210L BrAC to 0.049 g/210L

BrAC and red for readings greater than 0.050 g/210L BrAC. The Recovering period is

indicated by 'Recovering' shown on the display (Refer Figure 12).

Refer to Section 9 for instructions on how to change the Setpoint values.

•

The Recovering period is the time the fuel cell sensor requires to recover from the previous breath

test. This period will vary according to BrAC readings displayed, longer for higher readings.

•

Remove the used mouthpiece by rotating it and it will come away from the spigot easily. Dispose of

the mouthpieces in a responsible manner.

•

To perform another breath test, repeat steps from section 3.5.1 and 3.5.2. Results will display on the

screen for 10 seconds. A user is able to override this function by pressing key to continue as displayed

on the screen.

•

Overrange result is if a result above 0.462g/210L is obtained the below screen will appear (Figure

12b)

REF: Alcolizer LE5 Alcohol Tester User Manual V15 docx

Figure 11- Analysing Sample Message

Figure 12- Various BrAC and Screen Colour Displayed

Figure 12b- Overrange screen display

Page 14