Alcolock LR max 사용 설명서 - 페이지 7
{카테고리_이름} Alcolock LR max에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alcolock LR max 15 페이지. Alcohol interlock
페이지 인쇄
Installation
Installation and service of the alcohol interlock
device must be done at an authorized
ALCOLOCK service centre by certified
personnel. Unqualified installation may affect
the safety and reliability of the vehicle.
Service centres are conveniently located, the
ALCOLOCK LR device will be installed while
you wait. You will receive full training on site
on the use of the device and compliance with
the program.
Service
You must visit your local service centre on
a prescribed schedule specified by your
jurisdiction for monitoring and calibration.
The alcohol interlock device will remind you
of your next scheduled service appointment
several days prior. If you do not attend your
service appointment the device will lock out
and you will not be able to start the vehicle.
Monitoring appointments are completed while
you wait.
For scheduling assistance and support
contact your service provider, Affordable
interlock Systems at 1 800 252 656.
INSTRUCTION MANUAL
Product overview
The ALCOLOCK LR controls the normal
operation of a vehicle through connections
with the power, starting and control systems.
To start the vehicle, the driver must provide
an accepted breath sample with an alcohol
concentration below the preset limit. During
the operation of a vehicle, the driver will
need to provide additional breath samples to
ensure continued compliance with program
requirements.
Operating temperature
The ambient operational temperature range is
-45 °C to +85 °C.
NOTE: The handset will show "Ready for
Test" in :
•
15 seconds at +20 °C
•
60 seconds at 0 °C; and
•
up to 3 minutes at -20 °C
It would be beneficial to keep the handset in
a warm environment prior to use.
Power down
To manually power down the device, press
and hold the left and right buttons until the
screen is blank.
To re-activate the handset, press any button.
7